Product ID : VISQ-SF
  • Visqueen 6Mil PE Vapor Barrier Block
  • Visqueen 6Mil PE Vapor Barrier Block
  • Visqueen 6Mil PE Vapor Barrier Block
Visqueen 6Mil PE Vapor Barrier Block
$0.09/sq.ft

In Stock

Delivery: 1-10 Business Days

?

Flooring: Enter your square footage in “quantity” window and our system will calculate your final square footage, number of boxes and the cost of the flooring (before shipping)

sq.ft
Min. Order: 100 / -
Total: -
Ask Bestlaminate Experts
1-800-520-0961 | email |
chat

Product Overview

Use Visqueen for installation of laminate flooring with pre-attached underlayment as well as vinyl click plank floors.

PE plastic film will add moisture protection to your floor wherever there is a possibility of moisture coming up from the subfloor. Visqueen 6mil PE film provides a solid moisture resistant barrier between your subfloor and the flooring.

Features

This 6 Mil Polyethylene Moisture Block Film Vapor Barrier underlayment is a durable, practical,and affordable moisture solution.

NOTE: This thin plastic film is suitable for laminate flooring with pre-attached underlayment and vinyl floors. For standard laminate (without pre-attached padding) use standard or vapor underpayment padding (2mm or 3mm thick).

Specification

Free shipping to 48 US States via UPS.

  • Sold per sq.ft.
  • Minumum 100 sq.ft purchase required
  • 6 Mil PE Film
  • Green
  • Polyethylen Moisture Block Film
  • Use it wherever there would be the possibility of moisture coming up from the subfloor.
  • Suitable for all floating floors
  • NOTE: This thin plastic film is suitable for laminate flooring with pre-attached underlayment and vinyl floors. For standard laminate (without pre-attached padding) use standard or vapor underpayment padding (2mm or 3mm thick).

    Installation Instructions

    • Ensure that the subfloor is dry before you put the underlayment over it. When your subfloor is perfectly clean ( use vacuum cleaner ) and ready for installation , roll out the Visqueen Vapor Underlayment, perpendicular to the direction of the laminate planks.
    • Start from the wall and nail Visqueen underlayment to the wall. Use utility knife to cut off the roll at the wall. Continue rolling out your underlayment and cut it at the wall.
    • Unroll the next section of underlayment. Overlap the rows - overlap should be 4- 6". Tape to seal the rows. Continue until the entire subfloor is covered.
    • Then install the flooring.

    Watch Our Step-by-Step Installation Instruction:How to Install Visqueen Vapor Barrier

    Product Reviews

    Login or Register to write a review.
    Reviewed by customer
    12/23/2014 - 03:45:01 PM
    great & easy!
    Great product, nice rollout for easy installation.

    Ebony B. from NC