Bestlaminate moldings are waterproof with a matching, decorative print design. Bestlaminate Stair Nose Moldings are 2” wide x 1” tall x 94” long.
Each Bestlaminate brand molding is made from the same exact paper design as their corresponding floors. Although these moldings share the same design, there are slight variations throughout the design and therefore are not “exact”, but rather complimentary.
Because of this, we recommend that you match the moldings to the planks that have the most similar design before starting your project.
Tip: Leave those planks aside so that when you go to use the moldings, the surrounding planks will be the closest in color.
Stair Nose Moldings are used to finish off the step or stairwell where the floor stops. The rounded bullnose edge extends down to cover the edge of the step and is typically placed on the step before the flooring. Proper stair nose installation can add value to any home.
If you have questions about which molding would be best for you, please do not hesitate to contact us. We are here to help!
|Unit of measure||pc|
|Stair Nose Type||Overlap|
|Molding Style||Stair Nose|
|Suitable For Floors||Laminate|
|Moldings Length||94 inch|
When installing any molding, it is best if you follow the manufacturer's instructions. Reading the material that we have provided below, as well as the manufacturer's instructions, will help you with a successful installation.
Manufacturer Installation Guides:
Additional Installation Information:
When your project consists of multiple areas or rooms, we recommend drawing the spaces and dividing them into separate areas. Measure each area separately, and add each area into our calculator to get total square footage of your project.