Bestlaminate moldings are waterproof with a matching, decorative print design. Bestlaminate Universal T-molding and Reducer Molding is 2” x 1/4” x 94” long.
Each Bestlaminate brand molding is made from the same exact paper design as their corresponding floors. Although these moldings share the same design, there are slight variations throughout the design and therefore are not “exact”, but rather complementary.
Because of this, we recommend that you match the moldings to the planks that have the most similar design before starting your project.
Tip: Leave those planks aside so that when you go to use the moldings, the surrounding planks will be the closest in color.
The Universal molding can be used as a T-molding, which is commonly used in doorways to join two floors of the same type, such as laminate to laminate. This can also be used to transition between two floors of different types, but are the same height, such as vinyl to hardwood. The Reducer can be used to transition between two floors, the same types or different, that are also different heights. This allows for a wider range of uses. The Reducer function of this universal molding can also be used to transition carpeting!
If you have questions about which molding would be best for you, please do not hesitate to contact us. We are here to help!
|Unit of measure||pc|
|Suitable For Floors||Vinyl|
|Moldings Length||94 inch|
When installing any molding, it is best if you follow the manufacturer's instructions. Reading the material that we have provided below, as well as the manufacturer's instructions, will help you with a successful installation.
Manufacturer Installation Guides:
Additional Installation Information:
When your project consists of multiple areas or rooms, we recommend drawing the spaces and dividing them into separate areas. Measure each area separately, and add each area into our calculator to get total square footage of your project.