How To Install Felt Cushion 3-in-1 Flooring Underlayment

Need instructions for how to install Felt Cushion 3-in-1 flooring underlayment? We’ve got you covered.

Before you install your flooring, you need to lay down the right underlayment. This offers a barrier of protection between your floors and the subfloors. With Felt Cushion 3-in-1 flooring underlayment, you get three benefits in one:

1. Offer a protective layer.
2. Keep out excess moisture.
3. Minimize sound pollution and noise.

With the three benefits rolled into one cushioning layer, your floors will have the support needed to look and feel amazing for years to come.

Installing Felt Cushion 3-in-1 Flooring Underlayment

Before the installation process begins, get organized. Get all of your tools and materials together to make installing your underlayment as simple and straightforward as possible. Doing so will keep your project running smoothly.

Here’s what you will need to install your underlayment.

  • Felt Cushion 3-in-1 flooring underlayment
  • Broom and Dustpan
  • Tape
  • Scissors or a Utility Knife

Now that you’re ready, let’s get started!

Step 1: Prepare Your Subfloor.

Your subfloor should not have any dirt or debris on it when you install the underlayment. This can damage the padding and your flooring.Check Your Subfloor

Do a visual inspection for any cracks, holes, protruding objects, unevenness, or moisture. If you notice any of these damages, stop the installation process and have them fixed. Do not continue until your subfloor is in good shape.

Subflor Damages

Step 2: Roll Out the First Row of Underlayment

Roll out your first row of Felt Cushion 3-in-1 underlayment with the film side downward. The felt side should be facing upward.

Roll out the underlayment

You should also keep the tape strip next to the wall. Unroll the underlayment with the overlapping film out toward the room.

Roll underlayment the correct way

Step 3: Cut the Sections

Using your scissors or your utility knife, cut the section of the underlayment. Felt is difficult to tear through so make sure whatever blades you use have sharp edges.

Cut underlayment

Step 4: Roll Out the Next Row

Following the same instructions in step 2, roll out a second row of underlayment. Remember, the tape side should be facing the other piece of underlayment and the overlapping layer should be facing outward.

Roll the next row

Step 5: Butt the Edging

Make sure that the sections line up evenly by butting the edges of the underlayment. Put the tape side over the overlapping strip. Be sure there is no extra overlap as this can weaken the integrity of your flooring.

Butt the underlayment edges

Step 6: Attach the First Two Rows

Using the adhesive strip, attach the first two rows. Tape the adhesive evenly over the overlapping film.


Step 7: Cut the Next Section

Following the above instructions, cut another section of Felt Cushion 3-in-1 underlayment.

Cutting the underlayment

Step 8: Install Your Flooring

Following the instructions from the manufacturer, install your flooring over the underlayment. Don’t forget to acclimatize your floors first!

Installing flooring over underlayment

That’s it! Continue following the steps until all of your underlayment is correctly installed. Once finished, you will have beautiful, comfortable, and protected floors.

Proud of what you accomplished? Show us in the comments below!

More Installation Tips:

Leave a Reply

Your email address will not be published.