Flush Stair Nose Molding MSI Everlife Cyrus/Prescott Hawthorne VTTHAWTHO-FSN

MSI moldings are vinyl wrapped and feature a waterproof plastic core. The moldings are 2.75" on the top and 0.75" on the overhang and are 94" long and easily snap into the included plastic strip. The flush stair nose molding rounds over the edge of each step, while sitting flush to the flooring, creating a sleek look from step to step.Measure the width of the step and cut to the length. Apply a generous bead of construction adhesive along the underside of the stair nose. Carefully roll the stair nose into place against the front of the step. Press down firmly over the entire stair nose. Let the adhesive cure according to directions.

Flush Stair Noses are only recommended when the floor is being installed with a glue down application.

Special Features:

These moldings are made by MSI so the colors are made to pair specifically with their brand of flooring color! No hassling with selecting a look-a-like molding, when you can have the perfect shade and blend of color from the company that made the floors!

Warranty:

MSI moldings have the same warranty as their paired floor. See MSI flooring for manufacturer warranty details.

The warranty remains valid if the molding is installed properly and maintained according to the manufacturer's installation and maintenance guide. The warranty is only valid for the original end-consumer and is not transferable.

When installing any molding, it is best if you follow the manufacturer's instructions. Reading the material that we have provided below, as well as the manufacturer's instructions, will help you with a successful installation.

Manufacturer Installation Guides:

• How to Install an MSI Flush Stair Nose Molding

Additional Installation Information:

• Moldings Guide
• Finishing a Vinyl Flooring Installation

Maintenance Guides:

• Vinyl Flooring Maintenance and Cleaning
• How to Protect Your Vinyl Flooring
• How to Repair Damaged Vinyl