The moldings are 1.77" wide, 0.345" tall and 94" long and easily snap into the included plastic strip. The reducer molding is sloped on one side, essentially tapering off the floor as opposed to capping it. This piece is used for any transition where the two floors are not even with each other (laminate to tile, wood to laminate, etc), where one floor sits higher than the other. Install the floor leaving a 1" gap between the two floors for the surface reducer installation. Measure and trim to fit. Center the track between the flooring leaving a 1/4" spacing between the track and the floor planks. Screw track to subfloor (or glue with construction adhesive). Starting at one end, press the molding into the track inching along the length of the molding.
If you have questions about which molding would be best for you, please do not hesitate to contact us. We are here to help! Chat or Call us at 800-520-0961.
These moldings are made by MSI so the colors are made to pair specifically with their brand of flooring color! No hassling with selecting a look-a-like molding, when you can have the perfect shade and blend of color from the company that made the floors!
Disclaimer: We offer coordination, not exact match moldings. All moldings are manufactured to be a close coordination to the floor. In certain lighting and situations it may appear to be a match but due to the process used to create transitions, it is impossible to create a "exact match". All moldings are custom made to order and non-returnable and non-refundable.
MSI moldings have the same warranty as their paired floor. See MSI flooring for manufacturer warranty details.
The warranty remains valid if the molding is installed properly and maintained according to the manufacturer's installation and maintenance guide. The warranty is only valid for the original end-consumer and is not transferable.
|Unit of measure||pc|
|Suitable For Floors||Vinyl|
|Moldings Length||94 inch|
When installing any molding, it is best if you follow the manufacturer's instructions. Reading the material that we have provided below, as well as the manufacturer's instructions, will help you with a successful installation.
Manufacturer Installation Guides:
Additional Installation Information:
When your project consists of multiple areas or rooms, we recommend drawing the spaces and dividing them into separate areas. Measure each area separately, and add each area into our calculator to get total square footage of your project.